A Croatian Bioenergy Village

A story brought to you by

Pokupsko is a municipality in north-western Croatia near the Kupa River. Surrounded by forests and hills, its 2.500 residents are accustomed to living in harmony with nature, a facet of life supported by the municipality’s aims for sustainable development. This has been achieved by investing in projects and maximising the utilisation of financial incentives from both national and EU funds. In the last 10 years, a number of projects related to energy efficiency and renewable energy have been implemented, having visible impacts on the residents’ quality of life.

As 70% of Pokupsko is covered by forested areas, one such project was the establishment of a biomass district heating plant to provide heat to public and commercial buildings, as well as households located in the centre. While there are plans to connect other parts of the municipality to the district heating facility, already 30 consumers benefit, meaning that over 75% of the energy needs in Pokupsko are satisfied through local resources, with the plan to reach 100% in the next five years.

The construction of the communal biomass heating plant has increased the quality of life of the residents; instead of having to chop wood into logs and light old wood furnaces manually, heat is now readily available by simply pressing a button. Not only is the price of this heat cheaper than fossil fuel, the regulation system also enables each customer to define the desired comfort level and monitor the heat consumed. One of the main beneficiaries of the new biomass heating plant is an elementary school in Pokupsko – which, unsurprisingly, is very involved with environmental protection and eco-topics. Through a wide range of activities, its students are instilled with respect for nature preservation and environmental protection. The biomass heating plant in Pokupsko also provides a strong positive social component, as part of the revenues from the heating is used as a scholarship for local children.

The main challenge faced by the project was securing the necessary subsidies in order to finance the construction of the biomass district heating plant. This was achieved by applying to the IPARD (Instrument for Pre-Accession Assistance in Rural Development) as well as through the Fund for Environment Protection and Energy Efficiency in Croatia–the first of such financing schemes in Croatia. The investment received as about 1,2 million EUR. Finally in 2015, after more than six years of preparation, the first and only communal biomass heating plant in Croatia was constructed. The Municipality of Pokupsko has been the key driving force of this project by recognising the benefits and actively participating in the project’s implementation, educational and promotional activities, and providing feedback, leaving them with more interest to pursue future projects.

About the campaign

The campaign is powered by Bioenergy Europe and relayed across Europe by both national and international partners supporting the belief that bioenergy is more than a renewable energy source, it is also a reliable path that will lead Europe to achieve its renewable energy transition in the shortest span of time.

Solid Biomass Conversion Processes

Logging, grinding, screening and drying operations are mechanical processes for enhancing solid biomass fuels. These operations help transform biomass into homogeneous fuel that is easy to handle, with a higher energy recovery (eg. woodchips, wood logs, agrofuel). In general, moisture content in woodchips used for energy generation in municipal or industrial plants ranges between 20-30%.

Densification is another popular way to transform woody material into an advanced fuel with high calorific value. This process involves compressing biomass and lowering moisture levels to a range of 8-10%, allowing for an homogenous fuel – either in the form of pellets or briquettes. The heat during compression fuses the lignin in the biomass, naturally binding the biomass together in a new, enhanced shape. Thanks to densification, the homogenous biomass fuel is easier to transport and can be used in automated biomass installations, such as pellet stoves and boilers.

Thermo-chemical conversions are now used to produce fuel with even higher calorific value, utilising torrefaction or steam explosion technologies. During the torrefaction process, wood is subjected to temperatures of 230°C-300°C at atmospheric pressure without oxygen. Comparable to some extent to coffee torrefaction, this method creates a fuel with unique characteristics. As compared to conventional wood, torrefied wood has very low (>5%) moisture content, is easily grindable and is relatively hydrophobic.

Thanks to advanced technologies, woody biomass can also produce liquid and gaseous fuels. Pyrolysis, for instance, is a thermal-chemical conversion that requires a high temperature (>400°C) and little oxygen to convert solid biomass into gas, liquid fuels (pyrolysis oil) and/or biochar. Gasification is another thermo-chemical conversion that takes place at high temperatures (>800°C), with limited oxygen and/or steam, and converts solid biomass into synthesis gas, known as syngas – which contains carbon and hydrogen and can be used to produce liquid fuels such as biodiesel.

Wet Biomass Conversion Processes

Wet biomass is present in high volume across Europe (manure, agricultural waste and by-products). As it contains too much moisture to be converted efficiently into energy via a direct combustion process, other conversion pathways and energy outputs have been developed by the biogas (eg. anaerobic digestion) and biofuel sectors (eg. fermentation). Anaerobic digestion and fermentation are the two main conversion pathways used for converting wet biomass feedstock into advanced fuel.

Anaerobic digestion is the microbiological process of decomposition of organic matter, in the absence of oxygen, and is common to many natural environments; it is largely applied today in order to produce biogas in airproof reactor tanks, commonly referred to as digesters. A wide range of micro-organisms are involved in the anaerobic process which has two main end products: biogas and digestate. Biogas is a combustible gas consisting of methane, carbon dioxide and small amounts of other gases and trace elements. Biogas can be used in direct combustion to produce heat, but also power if converted within a cogeneration plant or in adapted gas motors. Biogas can also be upgraded via purification processes to a biomethane that can be injected into the existing natural gas networks, used as a chemical product and/or vehicle fuel. Digestate is the decomposed substrate, rich in macro- and micro-nutrients and therefore suitable for use as plant fertiliser.

Fermentation is a biochemical conversion whereby microorganisms, including yeast and bacteria, convert matter into products such as ethanol and liquid transport fuel (biodiesel). This process is done in several stages. First, sugary and starchy feedstock such as corn must be crushed and combined with water, allowing enzymes to convert this starch into sugar. This ferments along with the addition of yeast and is distilled into bioethanol. Bioethanol can also be produced from cellulosic biomass, such as grass, wood and stalks, via fermentation; however, this process is more complex and involves a mechanical pre-treatment and the addition of enzymes, or the breakdown of the lignocellulose into sugar through hydrolysis, followed by the same procedure.

Solid bioenergy feedstock

Renewables represent 8,0% of EU-27 total energy consumption (22.473 kilotonnes of oil equivalent) in transportation, of which 68% is provided by biofuels in 2018. It is rather challenging to foresee how biofuels (in particular first-generation biofuels) will continue to develop, since recent EU legislation established a quota for these biofuels. EU statistics on renewables in transportation can also be misleading regarding the actual level of production, because multiple counting rules are applied in accordance with the EU renewable energy directive. Looking at it in more detail, the biofuel market is driven by biodiesel and bioethanol. Biodiesel was the first biofuel developed and used in the EU in the transport sector in the 1990s. EU-27 remains the world’s largest biodiesel producer and it consumed 13,303 Ktoe in 2018. By comparison, bioethanol consumption in 2018 reached 2,620 Ktoe for an actual production of 2,365 Ktoe (Biofuels Report, 2020).

Bioenergy comes in all shapes and sizes

Within our close environment, a great source of organic materials such as plants, algae, or organic wastes, can be valuable fuels as soon as a technology makes it possible to efficiently extract all of its energy potential. Bioenergy players traditionally refer to biomass to describe those usable feedstocks. Biomass currently used in Europe includes wood from forests, agricultural crops and residues, by-products from the wood and agricultural industry, herbaceous and woody energy crops, municipal organic wastes and manure, and could potentially integrate algae and marine biomass in the future.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.